Cup head nib bolts with large head

The head of the Cup head nib bolts with large head is like a large cup and is larger than that of the ordinary cup head bolt. This enables greater pressure to be dispersed when fixing things. Below the cup head, there is a protruding tenon that can be inserted into the corresponding groove or hole.

Product details

Cup head nib bolt with large head can enhance safety. Therefore, they are chosen when the sleeper panels come into contact with the old sleepers or additional fixation is required. The bolt head is inserted into the sleeper or pad hole to prevent the bolt head from rotating during installation. When standard studs or bolts may need support to withstand severe vibrations, they can provide reliable auxiliary locking.

Cup head nib bolts with large head can accelerate the speed of installing wear-resistant plates on the conveyor. Conveyors in quarries or mills need to be frequently replaced with sturdy wear-resistant plates. Insert them into the holes on the conveyor frame to immediately stop the rotation of the bolts and prevent loosening due to vibration.

They are used for assembling warehouse shelves. Warehouse shelves need to hold a large amount of goods and have extremely high requirements for stability. When assembling the shelves, the workers insert the tenon of the bolts into the holes of the shelf columns, make the large cup heads contact the crossbeams, and then tighten the nuts. They make the connections of the shelves more secure and enable them to safely carry a large amount of goods.

 Product parameters

Product feature

The contact area between the head of the Cup head nib bolts with large head and the connecting piece is large, which can evenly distribute the pressure to the fixed material and will not crush the material due to concentrated pressure. The tenon can be aligned with the pre-drilled grooves or holes. The operation is simple and the installation efficiency is high. It is fixed particularly firmly and is not easy to loosen.