Washer

Washer is a part usually used to pad between the connector and the nut, its purpose is to serve as a spacer to protect the surface of the connector from nut chafing, to disperse the pressure of the nut on the connector, and to reduce the detachment caused by vibration.Washers are usually metal or plastic, usually flat shaped metal rings. Since the torque after indentation is applied to prevent loss of preload, special occasions require hardened steel washers. Especially by insulating steel screws from aluminum surfaces.A tap (or faucet, or valve) used in a rubber or fiber gasket to stop the flow of water is sometimes colloquially called a gasket; But while they may look similar, washer and washer are often designed for different functions

What is the purpose of the washer?

A part used to pad between the connector and the nut, and is used as a spacer to protect the surface of the connector from nut chafing, to disperse the pressure of the nut on the connector, and to reduce the detachment caused by vibration. Washers are usually metal or plastic, usually flat shaped metal rings. Since the torque after indentation is applied to prevent loss of preload, special occasions require hardened steel washers.

Which side should the washer go on?

For general bolt connections, flat washers should be placed under the bolt head and nut to increase the bearing area. 2. Flat washers should be placed on the bolt head and nut side respectively. Generally, no more than two flat washers should be placed on the bolt head side and no more than one flat washers should be placed on the nut side

What kinds of washer are there?

Washer are divided into: Flat washers - Class C, large washers - class A and C, large washers - class C, small washers - class A, flat washers - class A, flat washers - chamfered type - class A, high strength washers for steel structure, spherical washers, conical washers, I-steel square inclined washers, channel steel square inclined washers, standard spring washers, light spring washers, heavy spring washers, internal tooth lock washers, internal saw lock Washer, outer tooth lock washer, outer serrated lock washer, single ear stop washer, double ear stop washer, etc

View as

Two Layer Self Locking Washer

Different from traditional washers. The two layer self locking washer has teeth that lock into each other. This stops them from coming loose when there's a lot of torque or when it gets hot and cold repeatedly. The company’s after-sales team at Xiaoguo® resolves queries within 4 hours, ensuring uninterrupted operations.

Read More Send Inquiry

Double Layer Self Locking Washer

The double layer self locking washer has a two-layer design. It creates steady friction, which helps it work well against vibration in moving situations. Xiaoguo’s digital catalog and 3D CAD files streamline product selection and integration for engineers.

Read More Send Inquiry

Conical Spring Washers

Conical spring washers are kinds of annular elastic fastener, also called disc elastic washer, conical elastic washer, which can prevent loosening and bear load.For architectural projects, Xiaoguo® supplies aesthetically finished fasteners that combine strength and visual appeal.

Read More Send Inquiry

Locking Taper Washer

The locking taper washer can grip into both the fastener and the piece you're working on. This helps it fight against spinning forces pretty well.The fasteners produced by Xiaoguo® are pressure tested before shipment to verify the performance of the product under dynamic loads.

Read More Send Inquiry

Spring Lock Washer

Unlike flat washers, the spring lock washer can adjust when things expand from heat or shrink. It keeps the joint strong in situations where there's movement or change.With warehouses in 6 countries, Xiaoguo® minimizes lead times and simplifies cross-border procurement.

Read More Send Inquiry

Cone Lock Washer

The cone lock washer is a conical washer with a toothed structure. When tightening the fastener, the conical lock washer will apply pressure in the axial direction, making the connection with the surface tighter and less likely to fall off. The self-locking nuts and high-strength washers produced by Xiaoguo® meet the strict safety requirements of critical applications.

Read More Send Inquiry

Tapered Lock Washer

A tapered lock washer is a cone,shaped fastener. Its job is to stop nuts or bolts from coming loose when there's vibration. It does this by using its tapered shape to create friction.The Xiaoguo® manufacturer has an ERP system that can receive batch orders, professional personnel, and convenient communication.

Read More Send Inquiry

Disc Spring Washer

Disc spring washers are mechanical parts with a conical disc structure. When installed, the concave surface faces the connector and the convex surface faces the nut.Xiaoguo® collaborates with clients to optimize fastener solutions, reducing assembly time and maintenance costs.

Read More Send Inquiry

<1 2 3 4 5...10 >

The professional China Washer manufacturer and supplier, we have own factory. Welcome to buy Washer from us. We will give you the satisfactory quotation. Let us cooperate with each other to create a better future and mutual benefit.