Type JA anchor bolt

The bolts of Xiaoguo® factory feature high durability and stability.JA anchor rods have high tensile strength, weigh about 1/4 of the same steel bar, are corrosion-resistant, and have a long service life.

One end of the Type JA anchor bolt is bent into a J shape, and the other end is partially threaded. It comes in various size specifications and can meet all kinds of installation requirements. It complies with the implementation standard of JIS B1178-1994. You can purchase it with confidence.

Application scenarios:

Type JA anchor bolts are used to fix CNC machine tools or presses on the factory ground. Their grip is stronger than that of standard anchor bolts. After drilling, insert the J-shaped hook end into the concrete and then tighten the nut. The curved shape can be deeply locked in the material to prevent loosening caused by vibration during continuous operation. They can prevent expensive equipment from being displaced over time.

Type JA anchor bolt is used to fix the stadium grandstand frame. They can withstand loads and are suitable for installing aluminum grandstands on concrete foundations. The J-shaped end will hook into the concrete when tightened to prevent it from being pulled out when the audience jumps or stomps their feet. When the frame nuts are tightened, they will not rotate.

Type JA anchor bolt is used to fix the generator pad of honeycomb towers. The backup generator of the remote tower must remain anchored. They fix the steel installation frame to the concrete pad. The J-shaped hook can resist strong winds or shaking during maintenance. They can prevent the generator from undergoing costly displacements during storms.

Parameters:

How to install?

Installing Type JA anchor bolt is simple and convenient. Generally, first insert the J-shaped end into the drilled hole, then put the object that needs to be fixed, such as the equipment base or other structural components, over the threaded end of the bolt, and finally tighten it with a nut and a washer. Its advantage is that during the installation process, if there is a slight deviation in the position, it can still be slightly adjusted because the J-shaped part has a certain amount of movement space.