Type B Fully Threaded Stud

Type B fully threaded stud is in the form of a slender cylinder. Its full thread can flexibly match connecting parts of different thicknesses and with different fastening requirements. They are more durable in damp and corrosive places.

Product parameters

Features

Type B fully threaded stud can be bidirectionally fixed. The threaded processing is fine, the pitch is uniform, and the surface is smooth without burrs. When screwed into the nut or threaded hole, it is smooth and unobstructed, avoiding the jamming and slippage problems caused by thread defects, improving the assembly efficiency. It can also better protect the threads of the connected parts, especially suitable for the installation of precision equipment.

Common Uses

B fully threaded stud is used to reinforce the fence latch. If your latch holes are worn out, they can help you repair them. Drill through the latch plate and the door post. Insert the pins. They won't wear out the holes. Tighten the nuts to both ends to adjust the tension. Prevent the sagging latch from coming off. It will not loosen when subjected to violent daily impacts.

Type B threaded stud is used for installing conveyor roller shafts. If you need to replace worn roller bearings, it simplifies assembly. Screw the nuts to both ends to fix the end cover. Threads can prevent intermetallic friction on the shaft and are more capable of withstanding continuous vibration. Downtime is reduced by 50%.

Type B fully threaded stud is used to fix the bucket teeth of the excavator. If your bucket teeth are loose, they can withstand the impact. Pass them through the adapter holes, and they can resist the wear of dirt. Screw the nut to both ends and tighten it forcefully. They won't break under hammering. It has a very long service life in rocky soil.