Locking Nuts with Polyamide Insert

China supplier Xiaoguo® Locking Nuts with Polyamide Insert are made of standard carbon steel with a PA66 nylon insert. They deliver reliable anti-loosening performance under continuous vibration and do not require additional washers or locking glue. These nuts are widely used in mechanical equipment and automotive applications. We provide stable bulk supply and strict dimensional control, making them a practical, cost-effective fastening solution for daily operations and bulk purchasers.

Send Inquiry

Product Description

Product size specifications:

（1）Common Metric Thread Size Range

Locking Nuts with Polyamide Insert come in regular metric sizes that fit most standard assembly needs, no custom or special sizes covered here. The common thread sizes start from M3 up to M12, which are the most frequently ordered sizes for daily industrial and daily use. We only list conventional standard sizes, no extra large or micro sizes, as these are the mainstream options for bulk orders and regular replacement.

（2）Matching Dimension & Tolerance Rules

Every thread size comes with a fixed matching hex width and total height, all made to standard industrial tolerances. There are no uneven or non-standard sizes at all. Take M3 for example, it has a set hex width and regular thin height; M6 and M8 are the most popular sizes, and every batch of these two sizes has the same exact dimensions. We check all sizes to make sure they fit standard bolt threads, so they go on smoothly with no jamming or loose fits.

（3）Nylon Insert Matching & Supply Notes

The inner nylon insert is made to match each thread size properly, no inserts that are too big or too small that would mess up the locking effect. All sizes we list are in stock for regular bulk orders, and each size is marked clearly on the package for easy sorting. These standard sizes work for common uses like machinery, furniture assembly, and small equipment repairs, covering basic daily fastening needs without any extra custom work.

Locking Nuts with Polyamide Insert

FAQ：

Can these Locking Nuts with Polyamide Insert be reused, and how many times?

You can reuse these nuts when you install them properly, but we don’t suggest reusing them over and over again. If you use regular tools the right way and don’t tighten them too hard, you can take them apart and reuse them 3 to 4 times, and the locking effect won’t drop clearly. After being used several times, the inner nylon insert will wear down little by little, and the locking power will get weaker. For equipment that runs with constant vibration, we recommend replacing the nuts directly to stop them from coming loose during daily use.

Comparative advantages：

Comparison Item	Xiaoguo® Product——Locking Nuts with Polyamide Insert	Common Peer Products
Raw Material Quality	Standard grade steelThickened polyamide linerDuring use, the liner will be firmly fixed and will not shift.	Low-quality steel or thin nylon gasketsAre prone to deformation or may come off after repeated assembly.
Dimension Accuracy	Comply strictly with standard tolerancesThe thread is smooth without burrsIt fits well with standard bolts	Loose toleranceThere is deviation in dimensionsThe threads are rough or uneven.
Locking Performance	Stable locking torqueNot likely to loosen under normal vibration conditionsNeeds to undergo regular torque testing before shipment.	Unstable torqueProne to loosening under slight vibrationNo strict internal inspection was conducted
Batch Consistency & Supply	The quality of each batch is consistent.The supply is stable.The size markings are clear.There are very few defective products.	The quality of each batch of products varies greatly.The delivery is unstable.There are more defective items in the goods.
Product Application	Daily industrial, furniture and mechanical assemblyis widely used.	The basic low-demand scenario