Weld Hexagon Nut With Flange

Weld hexagon nut with flange is somewhat similar to ordinary hexagonal nuts. They have six surfaces and can be tightened with a wrench. It has a distinctive feature. There is a raised ring beneath the nut, and this is the flange. Applicable to different environments and devices.

Product parameters

Product feature

Weld hexagon nut with flange is standard hexagonal welding nuts with an additional flat circular base-like seat. Lan can provide a larger welding surface area. A larger welding surface area usually means a stronger and more stable connection with the metal plate. When tightening the bolts, it also helps to better distribute the load beneath the nut, thereby reducing the possibility of dents appearing on thinner plates.

The hexagonal shape design of this weld hexagon nut enables you to exert more force when tightening or loosening the bolts, and it is less likely to slip. Thus, the operation is very convenient. That flange not only increases the welding area but also evenly distributes the pressure, thereby reducing the damage to the welded component.

Weld hex nut with flange is more neat.Since welding is usually performed on the edge of the flange, the actual weld is hidden under the outer edge of the flange. This can hide the weld spatter and make the final joint look cleaner than if it were welded directly to the nut body or through-hole. It is very practical when emphasizing appearance.

Weld hexagon nut with flange can sometimes serve as a simple seal. When compressed by the bolt head, it can help block the small gaps around the hole, preventing dust, moisture or smoke from passing through. Although the sealing effect is not perfect, it is still better than nothing for the basic environmental protection of panels or cabinets.