M16 D Shackles

This M16 D Shackles is easy to use and doesn’t need special tools or professional skills.First, turn the pin counterclockwise to loosen it slowly, and be careful not to drop it.

Then put the body through the chain, rope, or connection point you want to link.Line up the pin with the threaded hole on the shackle body.

Tighten the pin clockwise by hand first, then use a regular wrench to make it firm.Don’t tighten too much, as this can damage the threads.

Before use, check again that the pin is fully tight with no movement or wobble.Always use it within the rated load and do not go over the safe working limit to avoid accidents.

To remove it, just reverse the steps:loosen the pin with a wrench, unscrew it by hand, and take the fitting out.

After use, store it in a dry, ventilated area to keep it in good condition.

Product surface treatment

This M16 D Shackles uses a practical surface treatment that focuses on function, not looks.The surface is smoothed to remove sharp edges, burrs, and rough areas from production, so it’s safer to handle and install without scratching hands or damaging ropes and chains.

We use standard anti-corrosion treatment that creates a thin protective layer on the surface.It helps resist normal rust and light corrosion from moisture, humidity, and outdoor use.

The coating is even on the whole body and pin, with no thin or missing spots, so protection is consistent in different working environments.We don’t add shiny coatings, bright colors, or extra decorative layers. The surface is simple and durable.

This treatment doesn’t peel or fade easily during regular use, and it keeps working for a long time.The M16 D Shackles is also easy to clean—just wipe dust and dirt off with a dry cloth, and it stays in good condition for repeated use.

Q&A session

Could you provide us with free samples of the M16 D Shackles for quality inspection?

We offer 1 to 2 free samples for quality and size checking.You only need to pay for the international shipping cost.This shipping fee will be refunded or deducted from your later bulk order.

Samples will be sent within 48 hours after confirmation.You can check the material, workmanship, and actual fit to see if it meets your needs.