300 series stainless floating lock long clinching nut

Xiaoguo® is a professional foreign trade fastener company with many years of industry experience. Our 300 series stainless steel floating lock long rivet nut is a fastener used for thin plate connections. It allows the nut to float within a certain range, facilitating installation.

This 300 series stainless floating lock long clinching nut is a specialized permanent fastener for thin sheet metal. It has a unique floating cage that lets it move side to side, which helps with alignment when you install it in pre-punched holes.

Compared to standard nuts, its longer clinching length makes it way harder to pull out and better at resisting vibration. That makes it perfect for tough assemblies where you can only access one side. So if you need a strong, vibration-proof fastener for thin metal and can’t get to the backside, this nut is a solid choice. The floating cage takes care of minor alignment issues, so installation is easier even if holes aren’t perfectly lined up.

Core Advantages：

The main perks of this 300 series stainless floating lock long clinching nut are how its floating design handles alignment issues. The floating cage lets it adjust for small misalignments, so you don’t have to stress about holes being perfectly lined up.

The long clinch part is key too,it makes sure you get maximum thread engagement in thin materials like SPCC or aluminum sheets. That spreads the load out better, so it’s stronger. Plus, when you install it, it has high torsional strength, and it doesn’t loosen up from vibration.

Basically, this nut gives you reliable, long-lasting threaded connections. The floating design takes care of alignment, the long clinch makes it strong in thin metal, and it stays tight even when things are shaking. Good for when you need a fastener that just works without constant checks.

Floating lock mechanism：

A:Okay, so here's the thing about the 300 series stainless floating lock long clinching nut: that 'floating lock' bit means it can wiggle a bit when you're putting it in. This is handy because it handles those times when the panel or fixture holes aren't quite perfectly lined up,you know, small misalignments happen.

A: The 300 series stainless floating lock long clinching nut has a ‘floating lock’ feature that allows it to swing slightly when inserted. When the panel or fixing hole is not perfectly aligned and there is a slight deviation, the floating lock can be used for tightening.

The floating lock long clinching nut isn't totally rigid like some nuts, it's less likely to bind up or cross-thread when you screw into it. This keeps things running smoother,the threads engage better and more reliably. That means you can assemble stuff faster, and the joint itself holds up better over time, especially in tougher jobs. The key is the float; you don't have to get everything perfectly lined up beforehand, and the 300 stainless floating lock long clinching nut will still work right without causing headaches later.