Fully Threaded Studs With Oval Point

Fully threaded studs with oval points are usually flat or have a small plane. Common materials include carbon steel, stainless steel and aluminum alloy. It is often seen in weight-sensitive equipment and is also frequently used in damp or corrosive places.

Product parameters

Product Features

Fully threaded studs with oval point essentially have threads running through the entire stud, with one end gradually narrowing to an oval head. It is like a guide, guiding the studs smoothly into the holes during installation. This means that you are less likely to damage the threads on the parts, especially when operating manually or in narrow Spaces. Use a standard nut at the other end.

These fully threaded studs are similar products that are easier to screw in than ordinary studs. The elliptical head is specially designed for a neat entry into the threaded hole, which helps prevent the first thread from getting stuck. After screwing in the thread, it is very simple to screw it in using a stud screwdriver or a double nut. Full threads ensure maximum strength from the hole depth.

The fully threaded stud with oval point is practical fasteners for permanent or semi-permanent installation, and the studs need to be anchored first. The oval head is of vital importance. It makes manual start-up reliable and helps with alignment, even if the hole position is hard to reach. Full thread means you can adjust its depth as needed. Then, the exposed thread will become your installation point.

The fully threaded studs with oval point are characterized by having threads throughout. When screwed into the threaded holes, the force is more evenly distributed and can provide a stronger fastening force. The design of the elliptical head is quite unique. The tip is smooth and can automatically align when screwed into the threaded hole, eliminating the need for manual effort to align, which improves the installation efficiency.